Model L2 L2 LumaMax™ LED Flashlight Operator’s Manual Digitally-Controlled 5-Watt LED Flashlight Revision N/C 2-1-2004
L2 LumaMax LED Introduction The L2 LumaMaxTM is fitted with a 5-watt white LED module. Powered by two 3-volt 123A lithium batteries, the L2 features digital current regulation circuitry that matches the LED’s current requirements to the batteries’ output to achieve a consistent level of light output for the useable life of the batteries. The two-stage switch gives the user a choice of either a low-output beam or a highoutput beam from a single switch.
Operation Battery Replacement Unscrew the tailcap and insert new batteries with positive ends towards LED head assembly. Replace tailcap and hand tighten. Press tailcap pushbutton switch to test. Note: If batteries are inserted with positive ends towards the tailcap, the unit will not light. Damage will not occur. Reinsert batteries with positive ends towards the LED assembly. WARNING: Lithium batteries can explode or cause burns if disassembled, shorted, recharged.
SureFire® LED HEAD ASSEMBLY FLASHLIGHT BODY LOCK-OUT MARK SF123A BATTERIES TAILCAP LOCK-OUT MARK PUSHBUTTON SWITCH
L2 LumaMax LED Output & Runtime Accurately specifying light output (lumens) and runtime is more complicated for LED flashlights than it is for tungsten lamp flashlights. The light output of the L2 exceeds that of comparable SureFire tungsten lamp flashlights (6P, C2, E2e, etc.).
L2 LumaMax LED Warranty Claims For repair or replacement contact Customer Service at 800-828-8809 (toll free) or 714545-9444 and obtain a Return Merchandise Authorization number (RMA#). Then package the unit carefully and return (no COD’s please) to: SureFire Repairs Department, RA#___ 17680 Newhope Street, Suite B Fountain Valley, CA 92708-6122 SureFire will pay any reasonable shipping costs to return the unit to you.
