User's Manual

GET THE BEST FROM THE BEST
Your SureFire illumination tool has been designed and manufactured
to provide years of reliable service. Please review this manual to
ensure optimal performance.
LOCKOUT TAILCAP
Most SureFire illumination tools feature a lockout tailcap, which
prevents accidental activation during storage or transport. The
tailcap may need to be enabled prior to light operation.
To enable, rotate tailcap clockwise until pressing pushbutton
activates light.
To lock out tailcap, rotate counterclockwise until light will not
activate when pushbutton is pressed.
LIGHT OPERATION
The 6PX and G2X are equipped with a click-type tailcap pushbutton
switch. For momentary-on activation, press the push button partially. For
constant-on activation, press the pushbutton fully. Release pushbutton or
click again to deactivate.
6PX™ TACTICAL / G2X™ TACTICAL
BATTERY INSTALLATION / REPLACEMENT
The 6PX and G2X ships with two preloaded batteries. To load
or replace batteries:
1. Unscrew tailcap counterclockwise and remove.
2. Remove old batteries and dispose of properly.
3. Insert new 123A lithium batteries with positive (+) terminals oriented
forward.
4. Replace tailcap by screwing on clockwise. Press pushbutton (with
tailcap enabled) to test.
Note: Never mix old and new batteries; always replace all batteries at same time.
MAINTENANCE
Use a clean, dry cloth to wipe off body and window. Periodically clean
and lubricate threads and O-rings using a thin coat of non-migrating,
silicone-based lubricants. Avoid using petroleum-based lubricants that
can damage O-rings. For additional tips on maintaining your SureFire
illumination tool, visit www.surefire.com/faqs-maintenance.
ACCESSORIES
SureFire makes a full line of accessories for most of its illumination tools.
For a complete listing, visit www.surefire.com/partsaccessories.
ENABLE
DISABLE
Shown: 6PX Tactical
Shown: 6PX Tactical
Shown: 6PX Tactical
PRESS OR
CLICK TO
ACTIVATE