Model E1L & E2L Outdoorsman LED Flashlight Operator’s Manual 3-Watt LED Flashlight Revision N/C 1-1-2005
E1L & E2L Outdoorsman Introduction The E1L and E2L Outdoorsman LED flashlights are fitted with a three-watt LED module. Powered by 3-volt lithium batteries (E1L -1 battery, E2L - 2 battery), each feature digital current regulation circuitry that matches the LED’s current requirements to the batteries’ output to achieve a consistent level of light output for the useable life of the batteries. The E1L and E2L feature a click-on/click-off tailcap pushbutton switch.
Operation Battery Replacement Unscrew the LED assembly and insert new batteries with positive ends towards LED head assembly. Replace LED assembly and hand tighten. Press tailcap pushbutton switch to test. Note: If batteries are inserted with positive ends towards the tailcap, the unit will not light. Damage will not occur. Reinsert batteries with positive ends towards the LED assembly. WARNING: Lithium batteries can explode or cause burns if disassembled, shorted, recharged.
SureFire® LED HEAD ASSEMBLY FLASHLIGHT BODY SF123A BATTERIES CLICK ON/OFF TAILCAP PUSHBUTTON SWITCH E2L OUTDOORSMAN SHOWN IN ILLUSTRATION
E1L & E2L LED Flashlight Runtime E1L This extremely compact flashlight features a virtually indestructible, long-running LED with as much light output as a large 2 D-cell flashlight. Electronic power regulation provides a total useful runtime of four hours from a single lithium battery.
E1L & E2L Outdoorsman Warranty Claims For repair or replacement contact Customer Service at 800-828-8809 (toll free) or 714545-9444 and obtain a Return Merchandise Authorization number (RMA#). Then package the unit carefully and return (no COD’s please) to: SureFire Repairs Department, RMA#___ 17680 Newhope Street, Suite B Fountain Valley, CA 92708-6122 SureFire will pay any reasonable shipping costs to return the unit to you.
