Model A2-HA-xx A2 AviatorDigital Plus™ Flashlight Operator’s Manual Digitally-Controlled Dual Light Source Flashlight Revision A 6-1-2003
A2 AVIATOR Introduction The A2 Aviator® is fitted with three LEDs (Light Emitting Diodes) surrounding an incandescent main lamp. Powered by two 3-volt lithium batteries, the Aviator features digital current regulation circuitry and a two-stage switch. The current regulation circuitry matches the lamp’s current requirements to the batteries’ output to achieve a more consistent (even) level of light output for the useable life of the batteries.
OPERATION Lock-out Tailcap (U.S. Patent Number 6,222,138) The lock-out position disables the tailcap pushbutton switch and is suggested to avoid accidental light activation during storage. From the momentary-on position, rotate the tailcap approximately one and one half turns counterclockwise to lock the light in the OFF position. Battery Replacement Unscrew the tailcap and insert new batteries with positive ends toward LED assembly. Replace tailcap and rotate clockwise to the momentary-on position.
SUREFIRE® LED ASSEMBLY SCREW (3) FLASHLIGHT BODY SF123A BATTERY LOCK-OUT TAILCAP
A2 AVIATOR LED Output & Runtime Accurately specifying light output (lumens) and runtime is more complicated for LED flashlights than it is for tungsten lamp flashlights. What can be said, in simple terms at this time, is that the light output of the A2 exceeds the 60 lumen output of comparable SureFire tungsten lamp flashlights (6P, C2, E2e, etc.), and runtime is longer than the one hour specified for these tungsten lamp flashlights.
A2 AVIATOR LED Warranty Claims For repair or replacement contact Customer Service at 800-828-8809 (toll free) or 714545-9444 and obtain a Return Merchandise Authorization number (RMA#). Then package the unit carefully and return (no COD’s please) to: SureFire Repairs Department, RMA#___ 17680 Newhope Street, Suite B Fountain Valley, CA 92708-6122 SureFire will pay any reasonable shipping costs to return the unit to you.
