Model 918G Tactical Light Users Manual Remington 870 Shotgun 12 Gauge Protected by US.
Model 918G Tactical Light Introduction The Model 918G Tactical light provides a rugged and reliable source of high intensity light that is integrated into the fore-arm of the shotgun. The lamp is shock isolated. A two button ON/OFF switch and a Pressure Switch are located on the right side of the H18G Housing and wired in series. When the ON/OFF switch is ON pressing on the Pressure Switch will turn the light ON, release pressure and the light will go OFF.
Model 918G Tactical Light Kit Contents ! H18G Housing ! P90 Lamp Module ! DL323AC Battery ! Model Z10 Switch Blocker ! Alcohol Wipe ! Users Manual ! Installation Tool Lamp Replacement 1. Unscrew Bezel from Lamp Housing. Lift Lamp assembly out of Bezel. 2. Install replacement Lamp Assembly in Bezel and reassemble by screwing onto Lamp Housing until it is fully seated. Battery Replacement 1. Unscrew Lamp Housing from H18G Housing and shake out old battery. 2.
Model 918G Tactical Light Caution The battery used in the light is very powerful. Be sure that the switch is not touching anything when the light is stored. If the lamp is turned on while in a case or other container, the lamp can overheat and damage the light or surrounding materials. Remove the battery or unscrew the bezel far enough to prevent the lamp from turning on when stored. Do not use a 3 Volt Lamp in a 6 Volt system.
