Model 918 Tactical Light Users Manual Remington 870 Shotgun 12 Gauge Protected by US.
Model 918 Tactical Light Introduction The Model 918 Tactical light provides a rugged and reliable source of high intensity light that is integrated into the fore-arm of the shotgun. The lamp is shock isolated & can be activated by pressing the Pressure Switch along the right side of the fore-arm. A switch blocker is provided for users that want to reduce the functional size of the Pressure Switch.
Model 918 Tactical Light Lamp Replacement 1. Unscrew Bezel from Lamp Housing. Lift Lamp assembly out of Bezel. 2. Install replacement Lamp Assembly in Bezel and reassemble by screwing onto Lamp Housing until it is fully seated Battery Replacement 1. Unscrew Lamp Housing from H18 Housing and shake out old battery. 2. Install new battery with the + terminal facing out. 3. Reinstall Lamp Module. Specifications Light Output 105 Lumens Lamp Type High Press.
Sure-Fire LLC
Model 918 Tactical Light Caution The battery used in the light is very powerful. Be sure that the switch is not touching anything when the light is stored. If the lamp is turned on while in a case or other container, the lamp can overheat and damage the light or surrounding materials. Remove the battery or unscrew the bezel far enough to prevent the lamp from turning on when stored. Do not use a 3 Volt Lamp in a 6 Volt system.
