Model 617FG Benelli Tactical Light Users Manual Benelli Shotgun M1 Super 90 12 Gauge Serial No. M104801 and later Protected by US.
Model 617FG Tactical Light Introduction The Model 617FG Tactical Lights provide a rugged and reliable source of high intensity light that is integrated into the fore-arm of the shotgun. The lamp is shock isolated. There are three switches built into the H17FG Housing. A two button ON/OFF switch on the left side, wired in parallel, provides the means to turn the light ON and have it stay ON until it is turned OFF.
Sure-Fire LLC LAMP HOUSING P60 6V LAMP/ REFLECTOR L60 LAMP MODULE
Model 617FG Tactical Light Switch Blocker Installation If you want to disable the part of the pressure switch where you rest your hand, (and don’t want the light to come on) you can cover it with the Model Z10 Switch Blocker. First clean the portion of the Pressure Switch to be disabled using the Alcohol Wipe from the Kit. Then remove the paper backing from the underside of the Switch Blocker and press the Switch Blocker in place on the Pressure Switch. Battery Replacement 1.
Model 617FG Tactical Light Caution The battery used in the light is very powerful. Be sure that the switch is not touching anything when the light is stored. If the lamp is turned on while in a case or other container, the lamp can overheat and damage the light or surrounding materials. Remove the battery or unscrew the bezel far enough to prevent the lamp from turning on when stored.
