Model 617F Benelli Tactical Light Users Manual Benelli Shotgun M1 Super 90 12 Gauge Serial No. M104801 and later Revision A 7_1_99 Protected by US.
Model 617F Tactical Light Introduction The Model 617F Tactical Lights provide a rugged and reliable source of high intensity light that is integrated into the fore-arm of the shotgun. The lamp is shock isolated. A two button ON/OFF switch is on the left side of the H17F Housing and a Pressure Switch is on the right side. The switches are wired in parallel. The ON/OFF switch will turn the light ON or OFF. Press on the Pressure Switch and the light will come ON, release pressure and light will go OFF.
Sure-Fire LLC
Model 617F Tactical Light Switch Blocker Installation If you want to disable the part of the pressure switch where you rest your hand, (and don’t want the light to come on) you can cover it with the Model Z10 Switch Blocker. First clean the portion of the Pressure Switch to be disabled using the Alcohol Wipe from the Kit. Then remove the paper backing from the underside of the Switch Blocker and press the Switch Blocker in place on the Pressure Switch. Battery Replacement 1.
Model 617 Tactical Light Caution The battery used in the light is very powerful. Be sure that the switch is not touching anything when the light is stored. If the lamp is turned on while in a case or other container, the lamp can overheat and damage the light or surrounding materials. Remove the battery or unscrew the bezel far enough to prevent the lamp from turning on when stored.