Model 616F Benelli Tactical Light Users Manual BENELLI SHOTGUN M1 Super 90 12 Gauge Serial No.
Model 616 Tactical Light Introduction The Model 616F Tactical Light provides a rugged and reliable source of high intensity light that is integrated into the fore-arm of the shotgun. The lamp is shock isolated. A two button ON/OFF switch is located on the left side of the H16F Housing and Pressure Switch is on the right side. The switches are wired in parallel. The ON/OFF switch will turn the light ON or OFF. Press on the Pressure Switch and light will come ON, release pressure and the light will go OFF.
Sure-Fire LLC
Model 616 Tactical Light Kit Contents ! H16F Housing ! L60 Lamp Module ! DL223AC Battery ! Spacer Tube ! Hex Wrench ! Model Z10 Switch Blocker ! Alcohol Wipe ! Users Manual Switch Blocker Installation If you want to disable the part of the pressure switch where you rest your hand, (and don’t want the light to come on) you can cover it with the Model Z10 Switch Blocker. First clean the portion of the Pressure Switch to be disabled using the Alcohol Wipe from the Kit.
Model 616F Tactical Light Caution The battery used in the light is very powerful. Be sure that the switch is not touching anything when the light is stored. If the lamp is turned on while in a case or other container, the lamp can overheat and damage the light or surrounding materials. Remove the battery or unscrew the bezel far enough to prevent the lamp from turning on when stored.
