Model 338 638 H&K P7 Tactical Light Users Manual H&K P7 Pistol Revision C 4_1_99
Model 338 & 638 Tactical Light Introduction The Model 338 & 638 Tactical Lights provide a rugged and reliable source of high intensity light mounted below the barrel of the weapon. The lamp is shock isolated. The light can be activated by pressing on the Pressure Switch attached to the handgrip. Kit Contents ! H38 Housing ! L30 or L60 Lamp Module ! DL123A or DL223AC Battery ! Clamp Plate ! Screws (4) ! Velcro Hook & Loop ! Hex Wrench ! Alcohol Wipe ! Users Manual Installation 1.
Sure-Fire LLC
Model 338 & 638 Tactical Light Lamp Replacement 1. Unscrew Bezel from Lamp Module. Lift Lamp assembly out of Bezel. 2. Install replacement Lamp Assembly inBezel and reassemble by screwing onto Lamp Housing until it is fully seated. Battery Replacement 1. Unscrew Lamp Module from Housing and shake out old battery. 2. Install new battery with the + terminal facing out. 3. Reinstall Lamp Module.
Model 338 & 638 Tactical Light Caution The battery used in the light is very powerful. Be sure that the switch is not touching anything when the light is stored. If the lamp is turned on while in a case or other container, the lamp can overheat and damage the light or surrounding materials. Remove the battery or unscrew the bezel far enough to prevent the lamp from turning on when stored.
