Model 318F 618F Tactical Light Users Manual Remington 870 12 Gauge Shotgun Protected by US.
Model 318F 618F Tactical Light Introduction The Model 318F & 618F Tactical light provides a rugged and reliable source of high intensity light that is integrated into the fore-arm of the shotgun. The lamp is shock isolated. A two button ON/OFF switch is on the left side of the H18F Housing and a Pressure Switch is on the right side. The switches are wired in parallel. The ON/OFF switch will turn the light ON or OFF.
Model 318F 618F Tactical Light Lamp Replacement 1. Unscrew Bezel from Lamp Housing. Lift Lamp assembly out of Bezel. 2. Install replacement Lamp Assembly in Bezel and reassemble by screwing onto Lamp Housing until it is fully seated. Battery Replacement 1. Unscrew Lamp Housing from H18F Housing and shake out old battery. 2. Install new battery with the + terminal facing out. 3. Reinstall Lamp Module.
Sure-Fire LLC
Model 318F 618F Tactical Light Caution The battery used in the light is very powerful. Be sure that the switch is not touching anything when the light is stored. If the lamp is turned on while in a case or other container, the lamp can overheat and damage the light or surrounding materials. Remove the battery or unscrew the bezel far enough to prevent the lamp from turning on when stored. Do not use a 3 Volt Lamp in a 6 Volt system.
