Model 313 613 Beretta Tactical Light Users Manual BERETTA PISTOLS 92F, 92SB & 96F Series Protected by US.
Model 313 & 613 Tactical Light Introduction The Model 313 & 613 Tactical Lights provide a rugged and reliable source of high intensity light that is integrated into the weapon. The lamp is shock isolated. The Housing holds the lamp and battery and is attached to the pistol frame with a Disassembly Latch. The light can be activated by pressing on the Pressure Switch attached to the handgrip or by pushing forward on the Switch Actuator Plates on the sides of the Housing.
Sure-Fire LLC
Model 313 & 613 Tactical Light 11. Select the location desired on the weapon for mounting the Pressure Switch. Clean the surface selected with alcohol to remove oil & dirt. 12. Remove the paper backing from the Velcro “loop” provided in the kit and place Velcro on weapon. 13. Wipe the flat side of the Pressure Switch with Alcohol to remove dirt. 14. Remove the paper backing from the Velcro “hook” and press it in place on the flat side of the Pressure Switch. 15. Position the Pressure Switch on the weapon.
Model 313 & 613 Tactical Light Caution The battery used in the light is very powerful. Be sure that the switch is not touching anything when the light is stored. If the lamp is turned on while in a case or other container, the lamp can overheat and damage the light or surrounding materials. Remove the battery or unscrew the bezel far enough to prevent the lamp from turning on when stored. Do not use a 3 Volt Lamp Assembly in a 6 Volt system.
