Model 306F 606F Beretta Tactical Light Users Manual Beretta 1200 PF 12 Gauge Shotgun Revision N/C 9_1_95
Model 306F & 606F Tactical Light Introduction The Model 306F & 606F Tactical Lights provide a rugged and reliable source of high intensity light that is integrated into the fore-arm of the shotgun. The lamp is shock isolated. A two button ON/OFF switch is on the left side of the H06F Housing and a Pressure Switch is on the right side. The switches are wired in parallel. The ON/OFF switch will turn the light ON or OFF.
SureFire LLC
Model 306F & 606F Tactical Light Kit Contents ! H06F Housing ! L30 or L60 Lamp ! Spacer (short, slotted) ! Spacer (long with collar) ! DL123A or DL223AC Battery ! Model Z10 Switch Blocker ! Hex Wrench ! Alcohol Wipe ! Users Manual Switch Blocker Installation If you want to disable the part of the pressure switch where you rest your hand, (and don’t want the light to come on) you can cover it with the Model Z10 Switch Blocker.
Model 306F & 606F Tactical Light Caution The battery used in the light is very powerful. Be sure that the switch is not touching anything when the light is stored. If the lamp is turned on while in a case or other container, the lamp can overheat and damage the light or surrounding materials. Remove the battery or unscrew the bezel far enough to prevent the lamp from turning on when stored. Do not use a 3 Volt Lamp Assembly in a 6 Volt system.
