Manual

CHANGING THE LAMP
1. Remove the Head from the Body by rotating
the Body counterclockwise (as viewed from
the tail) until it separates from the Head.
2. Access to the Lamp Assemblies requires
removing the Reflector from the Head. Using
a 5/32” Allen wrench, remove the Allen Screw
positioned in the center of the spring located
inside of the base of the Head to release the
Reflector from the Head.
3. Carefully separate the Reflector from the
Head and replace the inoperative Lamp. Avoid
touching Lamp envelope to prevent
degrading the surface.
4. Reinstall the Reflector on to the Head and
secure with the Allen Screw. Reinstall the
Head on to the Body.
ALLEN SCREW
REFLECTOR
MN30
LAMP
ASSEMBLY
BATTERY ASSEMBLY
HEAD
MN31
LAMP ASSEMBLY