Manual

CHARGING THE 10X
1. Connect the 12VDC Adapter to the In-line
Connector on the Charger Head power cable.
2. Insert the Adapter into 12VDC receptacle,
such as a vehicle cigarette lighter.
IN-VEHICLE CHARGING (12VDC)
WA LL SOCKET CHARGING
1. To expose the Charging Channel, with the
light “OFF”, hold the Head of the 10X and rotate
the Body counterclockwise (as viewed from the
tail) two (2) turns to expose the Channel.
2. Position the 10X Dominator with the inset
Silver Ball away from the Charger and slide the
10X Charging Channel on to the Charger Head
bracket. Design prevents improper positioning
in the Charger Head. Rotate the Dominator
Body 1/4 turn clockwise to engage Charger lock.
3. The Red Indicator will illuminate indicating
that charging is in progress. The Green Indicator
will illuminate when charging is completed (two
(2) hours or less) and a trickle charge is initiated.
4. To unlock and remove from the Charger,
rotate the Body 1/4 turn counterclockwise and
withdraw from the Charger. Holding the Head,
rotate the Body two (2) turns clockwise to return
the Charging Channel into the Head.
1. Connect the Smart/Rapid Charger
powercord to a 110/120VAC power source.
PROCEDURE
The 10X Dominator features a Charging Chan-
nel containing the electrical contacts for Ni-
Cd battery charging. This Charging Channel
is a groove normally hidden within the Head
of the 10X. The Charging Channel must be
exposed so the 10X can be mounted on the
Charger Head.