Manual

ACTIVATION
Constant Light
Turning the 10X Head counterclockwise
(CCW), as viewed from the tail, will turn “ON”
the Working Lamp Assembly; continuing
rotation (about 2/3 turn) will activate both the
High-Power Lamp Assembly and the Working
Lamp Assembly. When the Head is positioned
to activate the Working Beam, pressure on the
tail Push Button can be used to activate the
High-Power beam boosting the output to 500+
lumens, release of pressure will return the beam
to Working level. Clockwise rotation of the
Head will turn the light “OFF”.
Momentary Light
The Two-Phase Push Button is a spring loaded
two-step switch located on the tail of the 10X.
Pressing in the Push Button will initially turn
“ON” the Working Beam. Additional pressure
will activate both lamp assemblies, producing
the intense 500+ lumen High-Power beam.
When pressure is released the light will turn
“OFF”.
Battery Storage
When the Battery Assembly is removed from
the flashlight, slide the Battery Assembly
cover over the Battery Assembly to keep the
contacts clean and protect them from damage.