User's Manual

Instructions for completing the Timco Engineering, Inc.
TCB Application Form 731
All Shaded areas are required
Item 1, Item 2 and Item 3:
Please complete these sections with the APPLICANT’S contact information. This information will be verified against
the information listed in the FCC’s database. Changes in Applicant contact information must be handled separately
with the FCC. Contact us if changes to the Applicant’s information is necessary.
Item 4:
Please enter the FCC ID of the device. The FCC ID consists of the 3-digit Grantee Code and an Equipment
Product Code. The Equipment Product Code may consist of up to 14 characters and may contain “dashes” (-).
Please remember to use dashes when appropriate.
Item 5:
Application Contact - This is Timco’s customer. Only one contact is acceptable: the organization that submits the
application. All correspondence regarding the application will be directed to this contact. When issued, the original
Grant and Invoice will be sent to this contact. This contact may not always be the test lab that performed the testing
of the device. This contact may be a third-party agent or the Applicant itself. Please complete all areas.
Item 6:
Please indicate the name and location of the Test Laboratory where the testing took place. Please also identify the
Test Lab’s contact person and their contact information. For Part 15 and Part 18 applications please record the
FCC registered test site number.
Item 7:
Please indicate if a request for confidentiality of certain exhibits is requested with this application. You now can
choose between short-term confidentiality or permanent confidentiality. Short-term confidentiality is described in
FCC DA 04-1705 dated 6/15/04. A separate cover letter exhibit must be submitted with the application explaining
either request for confidentiality. This cover letter must refer to the correct FCC Rules that govern confidentiality,
must indicate which exhibits confidentiality is requested for and must provide adequate reason for the request.
Additional fees apply.
Item 8:
Please indicate if the application if for modular approval. If yes, a separate cover letter must be submitted
addressing the modular approval requirements of FCC DA 00-1407.
Item 9:
Please indicate if the application is for authorization of a software-defined radio.
Item 10:
Please provide the 3-digit Equipment Class. Examples of Equipment Classifications include “DXX” for Part 15 Low
Power Communication Device Transmitter and “8CC” for Part 18 Consumer Device (different Equipment
Classifications may apply for your device). Please provide a brief description of the device. The description that
you enter here will appear on the final Grant of Equipment Authorization.
Item 11:
Please indicate what type of application is being submitted. With applications for a Change in ID of Previously
Authorized Equipment or a Class II Change, a separate cover letter exhibit explaining the details of the change
must accompany the application.
Item 12:
Please indicate if the equipment in this application is a composite device or part of a system. Complete Item 12c
only if you check “Yes” in Items 12a or 12b.
Item 13:
Please indicate the FCC Rule Part(s) that the equipment will be operated under.
Item 14:
Please complete the appropriate sections for the Equipment Specifications.
Item 15:
Please affix the signature and Title of the authorized Applicant.