User's Manual

Item 11. *Application is for:
Original Equipment
Change in identification of presently authorized equipment:
Original FCC ID Grant Date (MM/DD/YYYY)
Class II permissive change or modification of presently authorized equipment
Class III permissive change to software defined radio
Note: this may only be filed for applications pertaining to Software Defined Radio
Item 12. Is the equipment in this application:
* (a) a composite device subject to an additional equipment authorization?
* (b) part of a system that operates with, or is marketed with, another device that
requires an equipment authorization?
If either of the above questions is answered “Yes” complete section 12 (c).
Yes No
Yes No
(c) The related application:
has been granted under the FCC ID listed to the right
is in the process of being filed under the FCC ID listed to the right
is pending with the FCC under the FCC ID listed to the right
FCC ID
Item 13. * Equipment will be operated under FCC Rule Part(s):
Item 14. EQUIPMENT SPECIFICATIONS: Where applicable
Frequency range in MHz
Low Freq High Freq
Rated RF
power
output
IN
WATTS
Frequency tolerance
%, Hz, ppm
Emission
Designator (See
47 CFR 2.201 and
2.202)
Microprocessor
model number
2412 2462
0.005
Read each certification carefully before answering and signing this application
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND/OR IMPRISONMENT (U.S.
CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT
(U.S. CODE, TITLE 47, SECTION 312 (a) (1)), AND/OR FORFEITURE (U.S. TITLE 47, SECTION 503).
(Continued on Next Page)