Product Datasheet/Brochure

Specification
Model No. Fusion5s
Uplink Frequency Range (MHz):
Downlink Frequency Range (MHz):
Supported Standards:
Input/Output Impedance:
50 ohm
Maximum Gain:
Noise Figure:
6 dB
AC Power Transmitter: Input AC 110 V, 60 Hz / Output DC 12 V
Maximum Output Power: 1 Watt EIRP
Cable: SC-400
RF Connectors:
N-Connector External / N-Connector Internal
Power Consumption: <25W
Dimensions:
Weight:
Installation Example
Fusion5s Yagi/Panel kit
TM
Fusion5s
9.25 x 6.38 x 1.38 inches
4 lbs 4 oz
Coax Cable (75 ft.)
Power Supply
Signal Booster
Inside Antenna
Outside Antenna
Coax Cable (30 ft.)
Voice and 4G LTE Data Home Cell Signal Solution
This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to
the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least
20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider. WARNING. E911 location information may not be provided or
may be inaccurate for calls served by using this device. This device may be operated ONLY in a fixed location for in-building use.
698–716 / 776–787 / 824-849 / 1850–1915 / 1710–1755 (G Block Included)
728–746 / 746–757 / 869–894 / 1930–1995 / 2110–2155 (G Block Included)
CDMA, WCDMA, GSM, EDGE, HSPA+, EVDO, LTE and all cellular standards
Cellular - 65 dB / PCS - 72 dB / LTE(A) - 63.5 dB / LTE(V) - 64 dB / AWS - 71 dB
Specifications are subject to change. Specifications contained within apply only to products meeting the latest FCC Certification Guidelines.