User Manual

5
SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | [e-mail]
5
Step 1: Mount Outside Antenna
Before you begin, please note that your installation may require the use of a mast or RV mounting
system on which to mount the
outside antenna. One has not
been provided and may be
obtained by a 3rd party.
The provided antenna is omni-
directional, which receives and
sends signals in a 360º radius.
Mount the antenna at the high-
est possible elevation and in an
upright position.
Ensure that the mounting area
has at least a 12-inch radius clear of obstructions and other radiating elements.
Installation:
1. Assemble the L-Bracket with U-bolts, brackets, nuts and washers and secure to mast.as shown
in the illustration
2. Remove all three screws from antenna base
3. Secure antenna to the horizontal plate of L-Bracket using screws.
4. Connect one end of the provided coax cable to the antenna and tighten the connection.
Cable
U-Bolts
Washers
Nuts
L-Bracket
Mast
(not provided)
Installation
Whip Antenna
Fusion2Go
Onmi Antenna
Cable