FusionTREK™ Voice, text & 4G LTE signal booster for your vehicle User Guide
Table of Contents Thank you for purchasing SureCall’s FusionTrek cell phone signal booster kit. FusionTrek provides enhanced voice, text and 4G data signal for any vehicle. If you have any questions during setup, please reach out to our US-based experienced support technicians: • Call: 1-888-365-6283 • Email: support@surecall.com Watch the quick install video https://youtu.be/_k20SwLBaQg TABLE OF CONTENTS How It Works..........................................................................................
How It Works HOW IT WORKS The SureCall FusionTrek is a high-quality bidirectional booster that enhances cellular signals for vehicles. The FusionTrek works with two antennas: • An inside antenna that communicates with your cell phone. • An outside antenna that communicates with the cell tower. Signals sent from a cell tower are received by the outside antenna, amplified by the booster and then sent to your cell phone via the inside antenna.
Package Contents PACKAGE CONTENTS 1. Unpack all package contents. For missing or damaged items, contact your reseller. 2. Turn over the signal booster and record the model and serial number for reference: Serial #: Purchase Date: Keep the carton and packing material to store the product in case you need to return it. Your signal booster package includes the following items: 1. SureCall FusionTrek Inside window mount signal booster 2 mounting options 2. Adjustable Window Suction-Mount 3.
Installation STEP 1: MOUNT BOOSTER ON/NEAR REAR WINDOW Mount booster in the center of your inside back window using one of the two options below. We suggest using the adjustable window mount option for vertical or near-vertical windows and the adhesive base mount for windows that are more angled, like sedans. For both installations you need to place the booster as close to the rear window as possible.
Installation STEP 2. MOUNT CRADLE ANTENNA & CONNECT COMPONENTS Identify a location for the inside antenna on or near your front dashboard that is 1. Place the magnetic cradle antenna on an air-vent, in your cup-holder or center-console. 2. Plug the barrel connector into the cradle antenna and route the cable from the cradle antenna to the booster. Screw the cable into the connector on the back of the booster. 3.
Installation STEP 3. CONNECT TO POWER 1. Plug the DC Power Adapter into power port of your car. 2. Switch the Power Switch to On and a red light will illuminate on the adapter. 3. The cradle antenna will illuminate a green light when it is receiving power. Note: Your phone will only receive the enhanced signal when it is placed on the cradle antenna. When your car is off, turn the power switch to OFF to keep the booster from continuing to draw power from your vehicle.
Troubleshooting TROUBLESHOOTING Problem Resolution Signal booster has no power Verify that the Power LED is ON. Connect the power supply to an alternate power source. Verify that the power source is operational and the fuse is intact. If it remains OFF, contact tech support at: 1-888-365-6283 or support@surecall.com After completing installation, signal has not Improved 8 Verify that cable connections are tightly fitted to the booster. Note: Bars are not always a reliable measure of signal.
Specifications SPECIFICATIONS Product FusionTrek (US) FusionTrek CA (Canada) Uplink Frequency Range (MHz): 698‑716 / 776‑787 / 824‑849 / 1850‑1915 / 1710‑1755 (G Block Included) Downlink Frequency Range (MHz): 728‑746 / 746‑757 / 869‑894 / 1930‑1995 / 2110‑2155 (G Block Included) Input / Output Impedance: 50 Ω Maximum Gain: 23 dB Gain Adjustment: 20 dB (Automatic) Supported Standards: CDMA, WCDMA, GSM, EDGE, HSPA+, EVDO, LTE and all cellular standards Noise Figure: ≤ 7 dB VWSR: ≤ 2.
Kitting Information ANTENNA KITTING INFORMATION Gain/Loss Notes Prod No. Description LTE-A LTE-V 800 MHz 1900 MHz Outdoor Antenna WPANT10104-S3A (SC325W-WP) 0.5dBi 0.5dBi 2dBi 2dBi 3dBi\3dBi Indoor Antenna SC128W -0.1dBi -0.1dBi -0.3dBi 3dBi 2.5dBi\3.2dBi Indoor Cable SC-174-15FT (15 Feet) 3.4dB 3.4dB 3.7dB 6dB 5.5dB \6.
Kitting Information PreAGC PreAGC Pulse GSM 4.1 MHz AWGN Frequency (MHz) Input (dBm) Output (dBm) Gain (dB) Input (dBm) Output (dBm) Gain (dB) Uplink: 1710-1755 0.4 20.8 20.4 0.2 18.8 18.6 Uplink: 1850-1915 2.2 23.6 21.4 1.6 21.0 19.4 Uplink: 824-849 1.4 21.4 20.0 -2.2 17.7 19.9 Uplink: 698-716 0.3 21.4 21.1 -1.1 19.6 20.7 Uplink: 777-787 -0.9 20.4 21.3 -1.2 19.9 21.1 Downlink: 2110-2155 -18.4 2.3 20.7 -20.7 0.8 21.5 Downlink: 1930-1995 -19.8 2.2 22.
Consumer Guidelines CONSUMER GUIDELINES This is a CONSUMER device BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider.
Warranty THREE-YEAR PRODUCT WARRANTY Register at www.SureCall.com SureCall warrants its products for three years from the date of purchase against defects in workmanship and/or materials. Specifications are subject to change. The three-year warranty only applies to products meeting the latest FCC Certification Guidelines stated on 2/20/2013 and going into effect April 30, 2014. A two-year warranty applies to any products manufactured before May 1, 2014.
48346 Milmont Drive Fremont, California 94538, USA 888.365.6283 www.surecall.
