Use and Care Manual

Table Of Contents

Step 3. Install the Booster and Inside Antenna

Choose a location for the booster and inside antenna that is near a working outlet and at least 25 Ft from the outside antenna.

Consider the below factors affecting booster performance.

1. Signal strength at the location of the outside antenna.

2. Interior building materials between the inside antenna and your mobile device.

3. Distance between the outside antenna and inside antenna (minimum 25 ft.

separation).

Panel Antenna

SureCall’s Inside panel antennas are directional with a 120˚ reach. They should be mounted facing the area signal is needed

and away from the outdoor antenna (See “Aiming Antennas”).

Mount on a vertical surface that is the approximate height of normal cell phone use. The antenna may

be concealed behind a wall provided there are no materials that could obstruct signals.

Besides the antenna itself, parts include mounting equipment for a at horizontal surface.

1. Using plate, mark position of desired screw placement.

2. Screw mounting plate into place with the slide panel protruding towards you.

3. Slide antenna securely onto mounting plate.

4. Connect antenna to one end of the SC-240 cable and run to planned location of your

booster

5. Place the booster on a at surface or mounted to a wall and connect the remaining

end of the SC-240 cable to booster port marked INSIDE.

Installation

Mounting

Plate

Screws

SC-240

Panel Antenna

Caution: Do Not aim antennas

towards one another.

Aiming Antennas