How to Guide

SureCall Fusion2Go Max User GuideSureCall Fusion2Go Max User Guide
www.SureCall.com | 1-888-365-6283 | [e-mail]8
* WARNING: The booster is rated for 5-15V input voltage. DO NOT use the booster with a higher voltage power
supply. This can damage the booster and/or cause personal injury.
LED Indicators
Place a call in a location you have previously experienced poor signal and conrm that your
phone is receiving a boosted signal. Normal operation is indicated by Green LEDs (both
ashing and solid). In the event Red LEDs appear, antenna adjustments may be needed.
Color Condition Indication
Green Solid Indicates normal operation.
Green Flashing Normal operation. Indicates that Automatic Gain Control (AGC) is self-
adjusting due to over-signal or antenna proximity.
Red Flashing Indicates issues caused by overpowering or oscillation.
Adjustment of your outside antenna placement is likely needed. Verify that it
has sufcient separation from the inside antenna, as well as, any potentially
interfering objects or antennas
Note that the booster case may become warm during operation. This is normal.
Troubleshooting
Problem Resolution
Signal booster has
no power
1. Verify that Power LED on the signal booster is ON.
2. Verify that power source is operational and fuse is intact.
3. Try connecting power supply to an alternate power source.
4. If power remains OFF, contact tech support at:
» 1-888-365-6283 or [e-mail]
After completing
installation, signal
has not Improved
Verify that all cable connections are tightly tted to the booster.
Try further separating the antennas.
 Note: Bars are not always a reliable measure of signal. The best way to
conrm signal coverage is the ability to place and hold a call.
Outside antenna
magnet doesn’t
work
For non-magnetic vehicle surfaces, use the optional adhesive tape included in
the packaging.