Fusion2Go ™ 3.0 Fleet Vehicle Voice and 4G LTE Data Signal Booster User Manual 05.30.
SureCall Fusion2Go 3.0 Fleet Thank you for purchasing SureCall’s Fusion2Go 3.0 cell phone signal booster kit. Fusion2Go 3.0 Fleet provides enhanced voice, text and 4G data signal for any vehicle. If you have any questions during setup, please reach out to our US-based experienced support technicians: • • Call: 1-888-365-6283 Email: support@surecall.
SureCall Fusion2Go 3.0 Fleet How It Works The SureCall Fusion2Go 3.0 Fleet is a high-quality bidirectional booster that enhances cellular signals for vehicles. The Fusion2Go 3.0 Fleet works with two antennas: • • An inside antenna that communicates with your cell phone. An outside antenna that communicates with the cell tower. Signals sent from a cell tower are received by the outside antenna, amplified by the booster and then sent to your cell phone via the inside antenna.
SureCall Fusion2Go 3.0 Fleet Package Contents • Unpack all package contents. For missing or damaged items, contact your reseller. • Turn over the signal booster and record the model and serial number for reference: Serial #: _______________________________________________________________________ Purchase Date: _________________________________________________________________ • Keep the carton and packing material to store the product in case you need to return it. Your Fusion2Go 3.
SureCall Fusion2Go 3.0 Fleet Step 1: Mount Outside Antenna Identify a location on the vehicle’s roof that (1) has at least a 12-inch radius clear of obstructions and other radiating elements, such as a radio antenna and (2) at least 6 inches away from any windows. Using a drill with a 3/4” hole saw bit, drill hole in the center of the desired location. Remove the metal collar from the connector and insert the NMO mounting cable through the hole. (see illustration).
SureCall Fusion2Go 3.0 Fleet Step 2. Install the Inside Patch Antenna Identify a location for the inside antenna on or near your front dashboard that is 1. Within 2-3 feet of the typical cell phone location 3. At least 4 inches (10cm) from metal 2. At least 8 inches (20cm) from cellular devices and Next, peel Velcro backing and apply to a clean dry surface in your chosen location. Or try this - Use the free vent clip provided with your product as a mounting surface then simply clip to an air vent.
SureCall Fusion2Go 3.0 Fleet Step 4. Connect Power Before and while wiring the power supply, disconnect vehicle battery. Hardwire installation requirements vary by vehicle. The following is only a general guide. Check with your manufacturer’s vehicle for specific electrical placement or requirements. Locate a +12V accessory (“ACC”) wire that will switch on and off with the ignition. Connect to the power source and ground.
SureCall Fusion2Go 3.0 Fleet LED Indicators Place a call in a location you have previously experienced poor signal and confirm that your phone is receiving a boosted signal. Normal operation is indicated by Green LEDs (both flashing and solid). In the event Red LEDs appear, antenna adjustments may be needed. Color Condition Indication Green Solid Indicates normal operation. Green Flashing Normal operation.
SureCall Fusion2Go 3.0 Fleet Specifications Product Fusion2Go 3.0 Fleet Uplink Frequency Range (MHz): 698‑716 / 776‑787 / 824‑849 / 1850‑1915 / 1710‑1755 (G Block Included) Downlink Frequency Range (MHz): 728‑746 / 746‑757 / 869‑894 / 1930‑1995 / 2110‑2155 (G Block Included) Input / Output Impedance: 50 Ω Maximum Gain: 50 dB Gain Adjustment: 20 dB (Automatic) Maximum Uplink Power 29.0 dBm Noise Figure: ≤ 5 dB VWSR: ≤ 2.
SureCall Fusion2Go 3.0 Fleet Antenna Kitting Information Gain Prod No. Description LTE-A LTE-V 800 MHz 1900 MHz 1700 MHz / 2100 MHz Outdoor Antenna and Cable SC-203WN and RG-58U (17 ft) 1.3 dB 1.2 dB 1.0 dB 1.6 dB 1.7 / 1.1 dB Outdoor Antenna and Cable SC-208W and SC174-12.5 ft (12.5 ft) -3.16 dB -5.15 dB -5.65 dB -2.85 dB -3.34 dB / NG Outdoor Antenna and Cable SC200W and SC174-10 ft (10 ft) -2.3 dB -2.3 dB -2.3 dB -5.8 dB -3.98 / -5.
SureCall Fusion2Go 3.0 Fleet PreAGC PreAGC Pulse GSM 4.1 MHz AWGN Frequency (MHz) Input (dBm) Output (dBm) Gain (dB) Input (dBm) Output (dBm) Gain (dB) Uplink: 1710-1755 -27.2 20.0 47.2 -25.3 20.7 46.0 Uplink: 1850-1915 -25.6 20.9 46.5 -25.9 19.6 45.5 Uplink: 824-849 -25.3 22.3 47.6 -21.7 25.6 47.3 Uplink: 698-716 -24.1 28.0 47.1 -20.1 26.6 46.7 Uplink: 777-787 -21.3 25.6 46.9 -20.5 25.9 46.4 Downlink: 2110-2155 -48.5 -3.7 44.8 -49.4 -4.5 44.
SureCall Fusion2Go 3.0 Fleet Consumer Guidelines This is a CONSUMER device BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider.
SureCall Fusion2Go 3.0 Fleet Three-Year Product Warranty Register at www.SureCall.com/Activate SureCall warrants its products for three years from the date of purchase against defects in workmanship and/or materials. Specifications are subject to change. The three-year warranty only applies to products meeting the latest FCC Certification Guidelines stated on 2/20/2013 and going into effect April 30, 2014. A two-year warranty applies to any products manufactured before May 1, 2014.
48346 Milmont Drive Fremont, California 94538, USA 888.365.6283 www.surecall.
