Manual

SureCall | www.surecall.com | 1-888-365-6283 | [e-mail]
5
BEFORE INSTALLATION
1. Prior to securing the location of any booster parts, a “soft install” is recommended as adjustments may be needed to
optimize performance.
2. Note that the outside antenna can be mounted to an exterior surface or a 1-2” diameter pole. A mounting pole is avail-
able separately. PVC piping from your local hardware can also be used.
3. Your planned location for the booster (central to where signal is needed) should be near an existing electrical outlet.
4. Ensure adequate separation between the planned locations of the booster and outside antenna (at least 25 ft.).
5. Ensure sufcient cable length between the outside antenna location and booster location. The length of the provided
cable is 50 ft.
Installation Overview
Step 1. Find the outside area with the strongest signal.
Step 2. Install the outside antenna
Step 3. Place the FlareDB+ on a table or desktop, center of the area where signal is needed.
Step 4. Connect the booster to an AC power source.
Frequency Band Check
FlareDB+ is a dual band 700 MHz cellular signal booster that amplies 4G LTE voice and data for Verizon, AT&T and
T-Mobile on Bands 12 and 13. Please conrm which bands your device is using prior to purchasing:
iPhone: Dial *3001#12345#* and press Call
Click ‘Serving Cell Info’
Then ‘Freq Band Indicator’ and check band number
Android: Download and install the ‘LTE Discovery’ App
Click ‘Signals’ and check the band number
Package Contents
Warning: Unauthorized antennas, cables, and/or coupling devices are prohibited by FCC new rules. Please contact FCC for details: 1-888-CALL-FCC.
Changes or modications not expressly approved by SureCall could void the user’s authority to operate the equipment.