Technical Guide

CHAPTER 8: SPECIFICATIONS
Electrical 700 MHz 800 MHz
Unit of measure
Frequency Range, Uplink MHz 788-789 / 779 – 805 806 – 816
Frequency Range, Downlink MHz 758-768 / 769 – 775 851 – 861
Channel Bandwidth KHz 12.5 / 25 / 75 and 10M 12.5 / 25 / 75
Number of Channels 32 32
TotalOutput Power,Uplink dBm
29
±
229
±
2
Total Output Power, Downlink dBm
33±1 33±1
MaximumSystemGain dB 90 90
Gain Adjustment Range (1dB step) dB 0-50 0-50
Pass Band Ripple, p-p dB ≤5 ≤5
Uplink Noise Figure dB ≤5 ≤5
System Group Delay usec ≤35 ≤35
Intermodulation dBm ≤-13 ≤-13
Spurious
9 kHz to 1 GHz dBm FCC Compliance FCC Compliance
1 GHz to 12.75 GHz dBm FCC Compliance FCC Compliance
Absolute Maximum RF Input Power dBm -10 -10
Impedance: ohm 50Ω 50Ω
FCC ID: FCC ID: RSNPSBG-2BUL
Certifications
FCC Part 90
https://signalboosters.fcc.gov/signal-boosters/
Federal Communications Commission
45 L Street NE
Washington, DC 20554
Phone: [phone]
TTY: 1-888-835-5322
Mechanical Specifications
Dimensions(HxWxD): in(mm) 21.2x17.2x8.0in(550x436x203mm)
Weight (Booster only): lbs (kg) 45.9 lbs (20.8 kg)
Weight (Box as shipped): lbs 53 lbs
Power Supply AC 100 – 240 / 50 – 60 Hz
DC 24 – 30 V
Power
Consumption
Single band W 80
Dual band
W 100
Enclosure Cooling Convection
RF Connectors N-Female
Operating Temperature °F (°C) -4 to +122 (-20 to +50)
Operating Humidity 95%