Technical Guide

Set

RFState

•

PS700 and PS800 share the same uplink RF link.

Setting the Uplink Attenuation on this page between

1 and 25 will simultaneously set the equivalent

value for all uplink channels for both PS700 and

PS800.

•

PS700 downlink Attenuation is used to attenuate the

downlink gain for 700MHz band. Inputting any value

between 1 and 25 will set the equivalent value for all

downlink channels in this band.

•

PS800 downlink Attenuation is used to attenuate the

downlink gain for the 800MHz band. Inputting any

value between 1 and 25 will set the equivalent value

for all downlink channels in this band.

Once updates are complete on this screen, click the

button to apply changes.

From the dashboard above you can manually adjust the attenuation dB to resolve problems. You can also turn off individual bands.