Technical Guide
28
7.5
Device Registration
Connect the device to the networked client computer with a USB cable
as described in the previous section. Make sure the server is also linked
to the computer. Select a serial port and click Open, as shown in the Add
Booster screen below.
Complete device registration as described below:
•
Click Refresh to query device parameters
•
Enter a name in the Booster Name field
•
Enter the location in the Location Address field (optional)
•
Click Add to register the device on the server
•
Keep in mind that only the registered user is authorized to
see/operate the added device.
7.6
Device Configuration
Using the same screen as before, configure the device according to the stepsbelow.
•
Select a serial port and click Open.
•
Click Refresh to query device parameters.
•
Click on the drop-down menu and select a server IP address and port number to make sure the device can be connected to the server.
•
Dynamic IP is available by checking Auto Search IP function, OR…
enter IP parameters manually, if the device needs a staticIP.
•
Click Apply to finish the configuration.
Modify Booster Information
. To modify the booster information, right click to access a pop-up menu with the following additional
options. Select Edit Booster Info to proceed.