Technical Guide

From the dashboard above you can manually adjust the attenuation dB to resolve problems. You can also turn off individual
bands.
RF State
• PS700 and PS800 share the same uplink RF link.
Setting the Uplink Attenuation on this page
between 1 and 25 will simultaneously set the
equivalent value for all uplink channels for both
PS700 and PS800.
• PS700 downlink Attenuation is used to attenuate
the downlink gain for 700MHz band. Inputting any
value between 1 and 25 will set the equivalent
value for all downlink channels in this band.
• PS800 downlink Attenuation is used to attenuate
the downlink gain for the 800MHz band. Inputting
any value between 1 and 25 will set the equivalent
value for all downlink channels in this band.
Once updates are complete on this screen, click the
Set
button to apply changes.
SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | [e-mail]
29
Sentry Configuration & Monitoring
DIF State
DIF (Digital Intermediate Frequency) is only for internal
operation.