Technical Guide

SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | [e-mail]
25
Sentry Configuration & Monitoring
7.5 Device Registration
Connect the device to the networked client computer with a USB
cable as described in the previous section. Make sure the server is
also linked to the computer. Select a serial port and click Open, as
shown in the Add Booster screen below.
Complete device registration as described below:
• Click Refresh to query device parameters
• Enter a name in the Booster Name field
• Enter the location in the Location Address field (optional)
• Click Add to register the device on the server
• Keep in mind that only the registered user is authorized to
see/operate the added device.
7.6 Device Configuration
Using the same screen as before, configure the device according to the steps below.
• Select a serial port and click Open.
• Click Refresh to query device parameters.
• Click on the drop-down menu and select a server IP address and port number to make sure the device can be connected
to the server.
• Dynamic IP is available by checking Auto Search IP function, OR…
enter IP parameters manually, if the device needs a static IP.
• Click Apply to finish the configuration.
Modify Booster Information. To modify the booster information, right click to access a pop-up menu with the following
additional options. Select Edit Booster Info to proceed.