Technical Guide

SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | [e-mail]
16
Planning the Installation
3.5 BDA Location
Select an indoor location for the BDA that meets the following criteria:
• Away from tightly enclosed or overly hot spaces
• Near a properly grounded 110VAC outlet
• Power and warning lights are easily visible
• Shortest possible cable runs to all antennas
3.6 Accessories
The final step in the planning process is to make sure you have all of the necessary accessories to complete the installation.
You will need all of the items listed in Chapter 1 of this manual plus some or all of the following:
• Cable clips: Use these to secure the cables to interior and exterior walls/ceilings.
• Appropriately rated sealant/caulking to waterproof exterior cable entry points
• Hand and/or power tools as needed to complete the installation
• Personal Equipment (PPE): Use all PPE required by local codes and/or best practices to help ensure personal safety during
installation.
Note: You may need to obtain a permit from your local building department to install the BDA and antennas. Check your local
building and/or electrical codes.
3.7 Need Help?
If you need help planning your installation, contact a qualified installer, the reseller who supplied you with the BDA, or
SureCall:
Call: 1-888-365-6283, 7 a.m. to 5 p.m. PST, Monday – Friday
Email: [e-mail]
CAUTION: YOU ARE RESPONSIBLE FOR ENSURING
THAT THE INSTALLATION MEETS ALL APPLICABLE
CODES.