Technical Guide

SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | [e-mail]
12
BDA Interface & Connections
2.9 Ethernet Interface (A4)
Male Connector used to transfer to internet or ethernet Female Ethernet Port (A4, RJ-45) on BDA
2.10 USB Interface (A7)
The USB connector is on top of the GuardianA unit, below the DIP switches, as shown below.
Only when initializing the network connection equipment, after initialization unplug the USB cable
As shown, the NEMA housing must be open to gain access to this port. The interface is used to initialize network connections
using a computer. Be sure to unplug the USB cable after the network initialization is completed.
TO
A7
TO
Computer USB
2.11 Alarm LEDs (A8)
Status Description Note
POWER
Green ON Normal
OFF Missing Power
ALARM1 Reserved for future use
ALARM2
Red ON
RF Module Summary Alarm:
Over-current
OFF Normal
ALARM3
Red ON VSWR Alarm
OFF Normal
ALARM4 Reserved for future use
ALARM5 Reserved for future use
Planning the Installation