Fusion7 ™ All-in-One Cellular, Wi-Fi, and HDTV Booster Kit User Guide
Table of Contents Thank you for purchasing SureCall’s Fusion7 cellular, Wi-Fi and HDTV booster kit. If you have any questions while assembling this kit please contact SureCall’s tech support team at: 1-888-365-6283 or email us at: support@surecall.com. Before installing your booster you need to register it with your carrier. You can do so online at the following urls: Verizon: http://www.verizonwireless.com/wcms/consumer/register-signal-booster.html AT&T: https://securec45.securewebsession.
How It Works SureCall’s Fusion7 is a high-quality bidirectional signal booster that enhances cellular signals to areas that are prone to weak cellular coverage. In addition, the Fusion7 has a built-in Wi-Fi router that extends users current network coverage. An HDTV booster is also integrated in the Fusion7 which brings locally aired HDTV stations, and with the built-in WiFi it provides enhanced streaming video through Netflix® and other on-demand streaming media providers.
Package Contents 1. Unpack all package contents. For missing or damaged items, contact your reseller. 2. Turn over the signal booster and record the model and serial number for reference: Serial #: Purchase Date: 3. Keep the carton and packing material to store the product in case you need to return it.
Package Contents Note: Fusion7 is available in four kits that are customized to your particular needs. Please determine which kit you have from the following list: Model Package Options SC-SEPTH/O-OD-Kit 1 Oudoor Omni, 1HDTV and 1 Inside Dome Antenna, 30’ SC-400 coax cable and 50’ and 75’ RG6 cable 1 Oudoor Yagi, 1HDTV and 1 Inside Dome Antenna, 30’ SC-400 coax cable SC-SEPTH/O-YP-Kit and 50’ and 75’ RG6 cable For a detailed description, see Kitting Information on page 21. Antenna Type Model No.
Before You Install Step 1. Make sure you have positioned the booster close enough to an existing electrical outlet,TV and Modem. Step 2. Make sure you have sufficient cable length between proposed outside antenna, HDTV antenna location and booster connector. Step 3 Make sure you have sufficient cable length between proposed inside antenna location and booster connector. Additional cable may be purchased from your dealer, if needed. Section 1: Cellular Installation Step 1.
Installing Your Hardware Step 1. Find the area with the Strongest Signal The signal booster requires a minimum cellular signal of low –100 dBm. Signal readings usually appear as a negative number (for example, -85). The more bars you get, the closer the dB gets to zero. Aim for a signal close to -50dB. Signals stronger than -50dB may cause the booster to shut down (see the graph below).
Installing Your Hardware Step 2. Install the Outside Cellular Antenna 1. Outside omni antennas receive and send signals in a 360º radius. Yagi, or directional antennas work best when facing the direction of cellular phone towers. Mount the outside antenna as high as possible. If you are installing a Yagi antenna set it up facing the cellular tower in the area where you located the best signal source (see step 1 on the previous page). 2.
Installing Your Hardware Fusion7’s omni antennas come with equipment for mounting on a vertical wall. For best results the antenna should be mounted in an upright position. Step 1: Unscrew antenna from L-mounting bracket on antenna base with hands, or wrench, if needed. Step 2: Using vertical plate of bracket, mark position of desired placement with pencil or marker. Step 3: Unscrew nut on end of stucco screw and remove it along with lock washer and regular washer.
Installing Your Hardware Step 3. Install the Inside Antenna Inside antennas come in omni-directional (dome) and flat panel versions. Antenna Separation Table Required Between Outside and Inside Antenna Amplifier gain n atio par e s a enn ant Min. separation (ad) 40dB 5-6’ 45dB 15-20’ 50dB 50’ 55dB 60’ 65dB 75-80’ 72dB 100’-110’ Note: As you can see from the table above, acquiring the recommended inside and outside antenna separation optimizes coverage significantly.
Installing Your Hardware The SC-222W multi-band plastic antenna is an omni-directional interior antenna that gathers signals from all sides. Range of antenna is dependent on three factors: 1) physical obstructions, 2) power generated by booster and 3) reception from outside signal received and distributed by outside antenna. Besides the antenna itself, parts include mounting equipment for either a flat horizontal surface or a wall. It should be mounted in an upright position for best results.
Installing Your Hardware Step 4. Install the Signal Booster 1. Select a location close to a working AC outlet. Do not expose the signal booster to excessive heat, direct sunlight, moisture, and airtight enclosures. 2. If you’d like to mount the booster to a wall, mark location of screw tabs on the wall in the desired location 3. Use supplied screws or appropriate screws for surface of mounting location and drill through screw tab holes on booster. 4.
Section 2 “ HDTV Installation 1.) Attach inside Coax cable to the HDTV1 access port on the side of the booster. 2.) Attach the other end of the cable to the Antenna port on the back of the television. 3.) Attach the outside Coax cable to the HDTV out port on the side of the booster. 4.) Connect the other end of the outside coax cable to the outside HDTV antenna. Scanning Local Television Channels. On your TV’s remote control press the Input or Source button, from there you’ll select “TV” or “Air”.
Installing your Hardware Booster Hardware The following image shows the key hardware components on the cellullar booster. Refer to this image as you install your Fusion5 kit components. SC288W SC400-35 35” Coax Cable Top View SC305W-H RG6-50ft WAN Bottom View RG6-50ft RG6-50ft SC400-75 75” Coax Cable TV or Television Device SC222W TV or Television Device The signal booster turns on automatically.
Installing Your Hardware Step 5. Configure Gain Settings 1. Find the PCS, Cellular, and LTE/AWS dials on top of the signal booter. 2. Set the dials according to the coverage area and the distance between the indoor and outdoor antennas (see next page) If Coverage Area is ... And Antenna Separation is ... Set All Dial to ...
Troubleshooting In the event you encounter a problem, follow the suggestions below to resolve the issue. Problem Resolution Signal booster has no power Verify that the booster switch is turned on. Connect the power supply to an alternate power source. Be sure the AC outlet is working and is not controlled by a wall switch that can cut power to the outlet. If the green POWER LED on the signal booster is OFF, return the power supply to SureCall. Contact tech support at 1-888- 365-6283 or support@surecall.
Specifications Problem Resolution The Alert LEDs flash after the initial activation period. Lower the dial above the blinking LED by 5dB (for example, from 65 to 60) and monitor the bars on your cell phone to see whether reception has improved. The Alert LEDs continue to flash The singal booster shuts down automatically, and then restarts after 60 seconds. Turn down the PCS, Cellular or LTE/AWS dial that is oscillating dial that is to prevent the signal booster from shutting down autimatically.
Kitting Information Kitting Information Product Number Description Component Description Outside Antennas* Outside Cable Inside Antenna* Inside Cable Gain / Loss LTE-A (Verizon & ATT) 700 Mhz Cellular 800 MHz PCS 1900 MHz AWS ( T- Mobile) 1700 \ 2100 MHz SC-288W 3 dBi 3 dBi 4 dBi 4 dBi SC-230W 10 dBi 10 dBi 10 dBi 10 dBi HDTV RG6 50FT SC-400-75NN (75 Feet) SC-248W SC-222W SC-400-30NN (30 Feet) -4.22dB –6.22 dB/-6.68dB –4.41dB –6.17dB –6.
Warranty Three-Year Product Warranty SureCall warrants its products for three years from the date of purchase against defects in workmanship and/or materials. Specifications are subject to change. The three-year warranty only applies to products meeting the latest FCC Certification Guidelines stated on 2/20/2013 and going into effect April 30, 2014. A two-year warranty applies to any products manufactured before May 1, 2014.
Warranty Limitations of Warranty, Damages and Liability: EXCEPT AS EXPRESSLY SET FORTH HEREIN, THERE ARE NO WARRANTIES, CONDITIONS, GUARANTEES, OR REPRESENTATIONS AS TO MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR OTHER WARRANTIES, CONDITIONS, GUARANTEES, OR REPRESENTATIONS, WHETHER EXPRESSED OR IMPLIED, IN LAW OR IN FACT, ORAL OR IN WRITING. SURECALL AGGREGATE LIABILITY IN DAMAGES OR OTHERWISE SHALL NOT EXCEED THE PAYMENT, IF ANY, RECEIVED BY CELLPHONE-MATE, INC.
This is a CONSUMER device. BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person.
