User's Guide

SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | [e-mail]
21
Chapter 6: Sentry Conguration
6.4 Device Registration
Connect the device to the networked client computer with
a USB cable as described in the previous section. Make sure
the server is also linked to the computer. Select a serial port
and click Open, as shown in the Add Booster screen below.
Complete device registration as described below:
• Click Refresh to query device parameters
• Enter a name in the Booster Name eld
• Enter the location in the Location Address eld (optional)
• Click Add to register the device on the server
• Keep in mind that only the registered user is authorized
to see/operate the added device.
6.5 Device Conguration
Using the same screen as before, congure the device according to the steps below.
• Select a serial port and click Open.
• Click Refresh to query device parameters.
• Click on the drop-down menu and select a server IP address and port number to make sure the device can be
connected to the server.
• Dynamic IP is available by checking Auto Search IP function, OR…
…OR enter IP parameters manually, if the device needs a static IP.
• Click Apply to nish the conguration.
The following summary screen appears if the booster connects to the server successfully:
Chapter 6: Sentry Conguration