Specifications

W arning: Unauthorized antennas, cables, and/or coupling devices are prohibited by the FCC. W arning: Unauthorized antennas, cables, and/or coupling devices are prohibited by the FCC.
SureCall EZ 4G Signal Booster | [e-mail] 6
ENGLISH
Step 3: Install Tabletop Antenna
Locate the area where you need cellular
connectivity most and place the Tabletop Antenna
in that area.
If you have 25-feet of distance between the Signal
Booster and Tabletop Antenna, you may place the
unit in an unobstructed space. If you have less than
25-feet of distance, you will want to place this in a
Best Antenna SeparationBest Antenna Separation
partially enclosed space, like an open cabinet, to create separation between the two antennas.
Step 4: Connect the Units
Temporarily unplug the Power Supply during this step. Hand-tighten one end of the RG6 Cable
to the Male outlet at the end of the Signal Booster cord, then do the same to connect the other
end to the Tabletop Antenna. Then reconnect the Power Supply.
Once connected, use the lights right of SureCall logo. These lights indicate the amount of
separation between the Signal Booster and Tabletop Antenna. The more lights here, the bigger
the signal boost (see LED Lights Explained).
Lastly, once connected, use the RG6 Cable Fasteners and Screws to run the cable seamlessly
along the baseboards for a clean installation.