User's Guide
SureCall | 48346 Milmont Dirve, Fremont CA 94538 | 1-888-365-6283 | sales@surecall.com
14
Installation
Chapter 4. Installation
This chapter describes how to install the booster and antennas for best results.
4.1 - Selecting the Locations
Select the locations for the exterior antenna, interior antenna(s), booster, cables, and accessories as
described in the previous chapter.
4.2 - Soft Installation
Perform a “soft” installation of all components to test signal coverage and oscillation before making
the installation permanent. Avoid making holes or other permanent xtures during this initial phase.
Please refer to Chapter 5 of this manual for conguration and testing instructions. Proceed with the
nal installation once conguration and testing are complete.
4.3 - Exterior Antenna
Mount the exterior antenna in the location you selected during the planning process. Be sure to follow
all of the instructions included with the antenna to ensure a safe installation. Remember:
• An omnidirectional antenna (SC-288W, etc.) must be mounted vertically.
• A Yagi antenna (such as the SC-230W) must be mounted horizontally and be aimed at the desired
cellular tower (line of sight).
CAUTION: FAILURE TO PROPERLY PLAN THE BOOST-
ER INSTALLATION CAN CAUSE SIGNAL OSCILLATION
AND/OR OTHER EQUIPMENT MALFUNCTION.
CAUTION: MOUNT THE EXTERIOR ANTENNA ON A
FIXED STRUCTURE.