=> SURRENDER’ PRO-180 180 WATTS HIGH TEMP GLUE GUN Operating Instructions Read Safely Rules and Instructions Carefully Save for Future Reference
IMPORTANT SAFETY WARNINGS: WHEN USING THIS HOT MELT GLUE GUN, ALWAYS FOLLOW BASIC SAFETY PRECAUTIONS; THIS WILL REDUCE THE POSSIBILITY OF ACCIDENTAL INJURY DUE TO BURNS OR ELECTRICAL SHOCK. Wear long sleeves, long pants, heat-resistant gloves and safely glasses. Temperature of glue gun and glue can reach over £00° F and caf cause serious burns. CT Keep out of reach of children; do not place glue gun where cord can be tripped scar. Keep away {from Flammable material.
IMPORTANT SAFETY INSTRUCTIONS (continued) Plug the glue gun into any AC outlet with required specifications. /\ f an extension cord must be used, use a heavy duty extension cord Recital warning that complies with all state and local electrical codes. Keep glue gun cord away from heat, solvents, sharp edges and objects, or anything that might cause damage. if cord becomes damaged, a qualified electrical technician should replace it. Unplug after use.
Features » 180 watts «Lightweight and durable body « Lighted On/Off power switch = [interchangeable nozzle «Unique trigger and handle with ergonomic design = Stroke adjustment option allows user to preset the amount of glue output = Extended metal stand for extra stability UNICEF balance «Safety Fuse: shuts glue gun off automatically in the event of a short.
8 ane 1. Plug the glue gun into any AC outlet with required specification. Turn the on/off switch button to the “On” position. 2. Allow the tool to heat for approximately 2-3 minutes. Insert a 7/16” adhesive stick inch the back of the gun. 3. When the gun is fully heated, squeeze the trigger slowly, until the melted slug begins to flow from the nozzle. Release the trigger to stop the glue flow. 4. Different nozzle tips are available for different gluing applications and output amount.
SUREBONDER® GLUE STICKS Glue Stick Size = FULL SIZE: 7/16” Diameter 15” lengths] Hot Mlle Glue Sticks Formula Descriptions Proud; Application Open Time Adhesive Color #601 Low Met for sealing corrugated cartons £ seconds Tan #701 | Faust-Ssiting carton sealing adhesive 15 seconds Tan #302 | Very-fest salting carton searing adhesive 5-10 seconds Ten #707 | High-Performances for difficult to band 30 seconds Clear #708 High Strength for carpet backing 40 seconds Tan #711 Fast-Setting cation and porous adhesive
Troubleshooting Minor problems may scour while operating your industrial glue gun. Listed below are several comment problems and tips on how they can be resolved. Nozzle Leading Some leakage from the nozzle is normal. This wit amount fo a few drops {5-10} after the gun is first plugged in or after a large amount of adhesive is dispensed. Abnormal leaks maybe caused by using glue sticks not formulated for this glue gun; Surebonder® glue sticks ara highly recommended.
WARRANTY If you have any problems with this tool, please call FPC Corporation toll-free at 1-800-860-3838 before returning i to the place of purchase. FBC Corporation warrants this glue gun to be free from defects in material and workmanship, under normal conditions of use and when sad in accordance with FPC operating instructions, for a period of 90 days from the date of purchase by the user. Within the 90 day warranty FPC at its option shall repair or replace glue gun.
RESPONDER’ PRO-180 PISTOLA ENCALADORA A ALTA TEMPERATURA DE 180 VATIOS Instrucciones de operación Lea las reglas e instrucciones de seguridad con cuidado y guárdelas para referencia futura
Características + 180 vatios » Carcasa ligera y duradera « Soguilla intercambiable « interruptor de encendido/apagado « Gatillo especial y mango con agarre de hule de disenso ergonómico = Soporte de alambre desentable « La opción de ajuste del tiro permite al usuario reajustar la cantidad de salida de adhesiva. = Soporte metílico extendido para mayor estabilidad. « Contrapeso de la pistola = Fusible de seguridad: Apaga {a pistola encaladora automáticamente en caso de un corto circuito.
