Instructions / Assembly

Loading Nails (continued)
To load:
Insert strip of nails into rear of magazine. Do not load with contact safety mechanism or trigger
depressed. Slide nail strip towards the front of the magazine, making sure strip is past the nail stop.
Pull feeder shoe completely behind the nail strip. Release the latch and the nail strip will be pushed
to the front of the magazine.
Nail stop
Note: Use nail strip with at least 5 nails remaining. This tool is equipped with a lockout feature that
prevents the tool from being activated when there are 3 or less nails in the magazine. The contact
safety mechanism will be locked in the until more nails are loaded into the magazine.
Latch
SPECIFICATIONS
Overall Dimensions: 18.11" x 14.6" x 3.94”
Capacity: 75 nails.
Nail Length: 2.9-7.1mm (2”-3 1/2”)
Nail size: .113"(2.9mm) - .131"(3.3mm)
Operating Pressure: 80 - 100 PSI
Air Inlet Size: 1 /4” N .P.T
Weight of Tool: 8.27 lbs.
NAIL SELECTION
Use SUREBONDER 750 Series
33° Clipped Head Framing Nails
or most 33° paper tape collated
nails 2” to 3-1/2".
1/4” Male Quick
Release Connector
Trigger
Rubber Grip
Nail magazine
Nail feeder
Contact Safety Mechanism
Saw tooth Safety
(remove cap)
Rubber Cap
Adjustable
Exhaust Cover
OPERATION
0
33
®
min. 2" (50 mm)
Min Max
.113
(2.9mm)
(6.8mm)
(7.1mm)
.131
(3.3mm)
5
6
Exhaust Deflector Depth Adjustment
Exhaust deflector can be positioned to point in any Using wrench provided, adjust the safety
360 direction. Reposition deflector by grasping element to achieve desired depth.
firmly and rotating to the desired position.
To remove fasteners: Depress the latch and
release the feeder shoe and slide it forward.
Remove fasteners from the tool.
0.266"
0.28"
max. 3-1/2 "(90 mm)
Nails Loaded
Latch
Bump/Sequential
Switch
Depth Adjustment