Installation Guide

SPECIFICATIONS
Overall Dimensions: 15.16" x 11.22" x 3.54”
Capacity: 100 brad nails.
Nail Length: 32-62mm (1-1/4”-2 1/2”)
Nail size: 15 Gauge
Operating Pressure: 70 - 100 PSI (4-7 bar) Length
Air Inlet Size: 1 /4” N .P.T
Weight of Tool: 5..29 lbs.
NAIL SELECTION
Use SUREBONDER 600 Series
15 Gauge 2-1/2” Angled Finish
Nails or most 15 Gauge paper
collated nails 1-1/4" to 2-1/2".
1/4” Male Quick
Release Connector
Trigger
Rubber Grip
Nail Magazine
Contact Safety Mechanism
Adjustable
Exhaust Cover
OPERATION
15
®
1-1/4” to 2-1/2 “
(3.20mm)
.072
(1.83mm)
5
6
Loading Nails (continued)
To load:
Insert a strip of brad nails into rear of magazine. Do not load with contact safety mechanism or
trigger depressed. Slide nail strip towards the front of the magazine, making sure strip is past the
nail stop. Pull feeder shoe completely behind the nail strip. Release the latch and the nail strip will be
pushed to the front of the magazine.
Latch
Depth Adjustment: To change the depth of the nail
turn thumbscrew counter-clockwise to drive the nail
deeper or clockwise to make the nail drive less deep.
Nails Loaded
Gauge
Exhaust Deflector
Exhaust deflector can be positioned
to point in any 360 direction.
Reposition deflector by grasping
firmly and rotating to the desired
position.
Nail Jams
Quick release nosepiece allows for fast jam clearing. Pull
lever downward, lift nosepiece and take out jammed nail.
Swing nosepiece into place attach lever catch and lift lever
to lock.
position
Nail specification
0.126”
32-64mm
Feeder shoe
Depth Adjustment
Feeder Shoe
Nail Stop
Nail stop