Installation Instructions

ManualsBrandsSurebonder ManualsAdhesivesHot Melt Wood & Fabric Glue Stick - 10 lb box

MATERIAL SAFETY DATA SHEET

Page 1 of 6

Prepared to U.S. OSHA, CMA, ANSI, Canadian WHMIS Standards, Australian WorkSafe, Japanese Industrial Standard JIS Z 7250:2000, and European Union standards

1. PRODUCT IDENTIFICATION

TRADE NAME (AS LABELED): Hot Melt Glue

PRODUCT NUMBERS: 701, 702, 707, 708, 711, 724, 725, 726, 727, 729, 735, 738,

739, 3120, 3130, 3140, 3145, 3150, 3170, 3190, 3210, 3220,

3240, All DT, GL, CO and HL series

CHEMICAL NAME: Hot Melt Glue

PRODUCT USE: Hot Melt Adhesive

MANUFACTURER'S NAME: FPC Corporation

ADDRESS: 355 Hollow Hill Drive

Wauconda, IL 60084

BUSINESS PHONE: 847-487-4583

FAX NUMBER: 847-487-0174

DATE OF PREPARATION: December 4, 2013

2. HAZARD IDENTIFICATION

EMERGENCY OVERVIEW:

Product Description: This product is a solid in various colors, with no odor.

Health Hazards: Contact with molten material will cause thermal burns. This product is not expected to cause adverse

health effects when used as intended. Prolonged or extended contact with product may cause skin irritation. Direct

contact with eyes may cause irritation. Ingestion of this product is not a likely route of entry. May cause gastrointestinal

irritation if swallowed.

Flammability Hazards: This product is combustible above flash point >450°F (>232°C) if exposed to ignition source.

Reactivity Hazards: None known.

Environmental Hazards: This material is not expected to be an environmental hazard

Emergency Considerations: Emergency responders must wear the proper personal protective equipment (and have

appropriate fire-suppression equipment) suitable for the situation to which they are responding.

US DOT SYMBOLS

CANADA (WHMIS) SYMBOLS

EUROPEAN and (GHS) Hazard Symbols

Non-Regulated Materal

Not Controlled

Signal Word: Warning!

EU LABELING AND CLASSIFICATION:

Classification of the substance or mixture according to Regulation (EC) No1272/2008 Annex 1

CAS# 24937-78-8 is not listed in ESIS

CAS# 69430-35-9 is not listed in ESIS

EC# 232-479-9 This substance is not classified in the Annex I of Directive 67/548/EEC

CAS# 68441-37-2 is not listed in ESIS

CAS# 9002-88-4 is not listed in ESIS

Substances not listed either individually or in group entries must be self classified

COMPONENT(S) DETERMINING HAZARD:

All Ingredients

GHS Hazard Classification(s):

Acute Oral Toxicity Category 5

Eye Irritant Category 2B

Acute Dermal Toxicity Category 5

Summary of content (6 pages)

PAGE 1
MATERIAL SAFETY DATA SHEET Prepared to U.S. OSHA, CMA, ANSI, Canadian WHMIS Standards, Australian WorkSafe, Japanese Industrial Standard JIS Z 7250:2000, and European Union standards 1.
PAGE 2
MATERIAL SAFETY DATA SHEET Hazard Statement(s): H320: Causes eye irritation H303: May be harmful if swallowed H313: May be harmful in contact with skin Precautionary Statement(s): P264: Wash hands thoroughly after handling P270: Do not eat, drink or smoke when using this product P280: Wear protective gloves/protective clothing/eye protection/face protection EU HAZARD CLASSIFICATION PER DIRECTIVE 1999/45/EC: [Xi] Irritant Risk Phrases: R22: Harmful if swallowed R36/38: Irritating to eyes and skin Safety P
PAGE 3
MATERIAL SAFETY DATA SHEET INGESTION: Routine use of this product is not expected to cause any situation which could lead to ingestion. If this product is swallowed, CALL PHYSICIAN OR POISON CONTROL CENTER FOR MOST CURRENT INFORMATION. If professional advice is not available, do not induce vomiting. Never induce vomiting or give diluents (milk or water) to someone who is unconscious, having convulsions, or unable to swallow. MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE: None known.
PAGE 4
MATERIAL SAFETY DATA SHEET 8. EXPOSURE CONTROLS - PERSONAL PROTECTION VENTILATION AND ENGINEERING CONTROLS: Use with adequate ventilation to ensure exposure levels are maintained below the limits provided below. Use local exhaust ventilation, and process enclosure if necessary, to control airborne dust. Ensure eyewash/safety shower stations are available near areas where this product is used.
PAGE 5
MATERIAL SAFETY DATA SHEET MATERIALS WITH WHICH SUBSTANCE IS INCOMPATIBLE: The product may react to strong acids, bases and oxidizing agents. POSSIBILITY OF HAZARDOUS REACTIONS: Will not occur. CONDITIONS TO AVOID: Avoid excessive overheating. Do not add water or other volatile material to molten adhesive. 11.
PAGE 6
MATERIAL SAFETY DATA SHEET 15. REGULATORY INFORMATION UNITED STATES REGULATIONS: U.S. SARA REPORTING REQUIREMENTS: The components of these products are not subject to the reporting requirements of Sections 302, 304, and 313 of Title III of the Superfund Amendments and Reauthorization Act. U.S. SARA THRESHOLD PLANNING QUANTITY: There are no specific Threshold Planning Quantities for any component of these products.