Instruction Manual

CQL1729-B Bluetooth Speaker
Instruction Manual (Read before proceeding)
Power:
 Works on internal rechargeable Lithium battery. Please charge your speaker fully
before first use. To charge the battery :
Using a Micro USB cable (included), insert the jack into the ”Charging” hole on the
back of unit under the silicone cover , then plug the USB connecter in to the USB port
on a computer for charging.
 A red light will indicate the charging situation. When battery is full, the red light will
turn off automatically.
Bluetooth Speaker Operation
 Turn on the unit by pushing the switch to “ON” position. The LED light on top will light
on indicate the speaker is in paring mode and searching for your Bluetooth mobile
device.
 Open the Bluetooth function on your device and search the speaker named “AR1025”.
After selecting this speaker, your device will pair without a password. (If required,
enter the password “0000” to finalize the paring).The Blue light will begin to flash
slowly after pair is complete.
 Start playing music on your device. Keep your device within 33feet (10 meters) of
your speaker.
 Adjust the volume of your device to a comfortable level.
 Control play/pause, volume up/next track and volume down/previous track either on
your connected device or by the buttons on the fabric of the speaker.
 Turn off the unit when not in use.
Light Operation
 Push the On●Off button to the “On” position to turn on the unit, the light will light up
automatically.
 Play music on your mobile device, the light will dance to the music.
 Turn off the unit , the light will turn off accordingly.
Caution:
 This is not a toy. Please keep away from small children.
 Please keep away from water / heat.
 Low power may cause poor connection even no working of Bluetooth.
 Do not over charge the battery.