User's Manual

CQL1726-B Bluetooth Speaker

Instruction Manual (Read before proceeding)

Power:

 Works on internal rechargeable Lithium battery. Please charge your speaker fully before first use. To charge

the battery :

Using a Micro USB cable (included), insert the jack into the ”Charging” hole and then plug the USB connecter

in to the USB port on a computer for charging.

 A red light will indicate the charging situation. When battery is full, the red light will turn off automatically.

Bluetooth Speaker Operation

 Turn on the unit by pushing the switch to “ON” position. A Blue light will start blinking to indicate the speaker

is in paring mode and searching for your Bluetooth mobile device.

 Open the Bluetooth function on your device and search the speaker named “XXXX”. After selecting this

speaker, your device will pair without a password. (If required, enter the password “0000” to finalize the

paring).The Blue light will begin to flash slowly after pair is complete.

 Start playing music on your device. Keep your device within 33feet (10 meters) of your speaker.

 Adjust the volume of your device to a comfortable level.

 Control play/pause, volume up/next track and volume down/previous track either on your connected device

or by the buttons on the fabric of the speaker.

 Turn off the unit when not in use.

Button Control:

+: Press it for next track. Long press it to increase the volume.

-: Press it for previous track. Long press it to decrease the volume.

>I: Press it one time to restart /pause your music playing.

Accessories:

1x speaker

1x user manual

1x back holder

1x USB charge cable.

Caution:

 This is not a toy. Please keep away from small children.

 Please keep away from water / heat.

 Low power may cause poor connection even no working of Bluetooth.

 Do not over charge the battery.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user's

authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part

PAGE 1
CQL1726-B Bluetooth Speaker Instruction Manual (Read before proceeding) Power:   Works on internal rechargeable Lithium battery. Please charge your speaker fully before first use. To charge the battery : Using a Micro USB cable (included), insert the jack into the ”Charging” hole and then plug the USB connecter in to the USB port on a computer for charging. A red light will indicate the charging situation. When battery is full, the red light will turn off automatically.
PAGE 2
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.