Instruction Manual

CQL1725-B Bluetooth Speaker SURE

Instruction Manual (Read before proceeding)

Getting Started

z Please charge your Bluetooth speaker fully before its first use.

z To charge the battery:

Using a Micro USB Charging Cable (included), insert the USB power cable into

the micro USB port located on the left of the speaker. Connect the other end of

the USB cord into a powered USB source such as a computer, laptop or USB AC

adapter.

The LED indicator will turn RED while charging.On low power, a tone will be

periodically heard, indicating that the speaker should be charged.

Powering ON/OFF

z Move the Power switch to the ON position. a voice will be heard and the speaker

will enter Bluetooth pairing mode.

z The speaker will enter Bluetooth pairing mode. The speaker will automatically

re-pair to any nearby previously paired devices.

z Move the Power switch to the OFF position to power OFF.

Playing Music via Bluetooth

z Power the speaker ON. A VOICE will be heard and the speaker’s light ring will

flash

z Make sure the Bluetooth function on your device is turned on.

z Search the speaker named“ XXX”.

z Once you have selected the speaker, your device will pair without a password. (If

your device prompts for a password, enter the password”0000”.)

z After a successful pairing, a voice will be heard and the the speaker’s light ring

will continue to flash.

z Start playing music on your device. Make sure that you keep your device within a

33 feet range of your Bluetooth speaker.

z Adjust the volume of your device to a comfortable level.

z Turn off the unit when not in use.

Using the FM Radio

z Press the M button until you hear a voice indicating FM mode.

z Press the button to search for stations.

z Press the and buttons to skip station.

For best reception, insert the small connector of the supplied USB charging cable

into the USB charging port on the side of the speaker but do not plug the large

connector into anything. The cable will operate as an antenna.

PAGE 1
CQL1725-B Bluetooth Speaker SURE Instruction Manual (Read before proceeding) Getting Started z Please charge your Bluetooth speaker fully before its first use. z To charge the battery: Using a Micro USB Charging Cable (included), insert the USB power cable into the micro USB port located on the left of the speaker. Connect the other end of the USB cord into a powered USB source such as a computer, laptop or USB AC adapter. The LED indicator will turn RED while charging.
PAGE 2
Position the speaker and the cable so that it has clear line of sight to the sky. Using a TF Card z While the speaker is powered off, insert a TF card into the TF card slot. A voice will be heard, indicating that the speaker is in TF card mode and will automatically play from the TF card. z Skip tracks using the and buttons on the speaker z Pause and resume playback with the button. z Note: TF cards can only be inserted in one direction.
PAGE 3
FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.