Instruction Manual

CQL1667-A Bluetooth Speaker

Instruction Manual (Read before proceeding)

Power:

z Please charge your Bluetooth speaker fully before its first use.

To charge the battery:

z Using a Micro USB Charging Cable (included), insert the USB power cable into the micro

USB port located on the back of the speaker. Connect the other end of the USB cord into a

powered USB source such as a computer, laptop or USB AC adapter.

z When your Bluetooth speaker is charging, the indicator light will turn red.

z Once your Bluetooth speaker is fully charged, the red light will turn off.

Playing Music via Bluetooth

z Turn your Bluetooth speaker on by sliding the power switch located on the back of the

speaker to ‘ON’ position. There is NO Bluetooth LED indicator hole for this unit. The

Bluetooth indicator light can NOT be seen from the proudct surface. Therefore, there is

NO Bluetooth indicator flashing status. Please do not put it on manual.

z Make sure the Bluetooth function on your device is turned on.

z Search the speaker named,” CQL1667-A

”.

z Once you have selected the pair name, your device will pair without a password. (If your

device prompts for a password, enter the password”0000”.)

z Once your speaker is paired, a tone will be heard indicating the Bluetooth is connected.

There is no Bluetooth LED indicator hole for this unit. The Bluetooth indicator light can

NOT be seen from the proudct surface. Therefore, there is NO Bluetooth indicator

flashing status after the speaker is connected. Please do not put it on manual.

z Start playing music on your device. Make sure that you keep your device within a 33 feet

range of your Bluetooth speaker.

z Adjust the volume of your device to a comfortable level. Control play/pause, volume

up/next track and volume down/previous track either on your connected device or by

the silicone control panel in the middle of the speaker.

z Turn off the unit when not in use.

Light Operation

z Switch the button to “on” position, the Bluetooth and the LED light will both be enabled.

z Play music on your mobile device, the light will dance to the music.

z Turn off the unit, the light will turn off accordingly.

z Caution:

z This is not a toy. Please keep away from children.

z Please keep away from water / heat.

z Low power may cause poor connection even no working of Bluetooth.

z Do not overcharge the battery.

PAGE 1
CQL1667-A Bluetooth Speaker Instruction Manual (Read before proceeding) Power: z Please charge your Bluetooth speaker fully before its first use. To charge the battery: z Using a Micro USB Charging Cable (included), insert the USB power cable into the micro USB port located on the back of the speaker. Connect the other end of the USB cord into a powered USB source such as a computer, laptop or USB AC adapter. z When your Bluetooth speaker is charging, the indicator light will turn red.
PAGE 2
z Battery pack shall not be exposed to excessive heat such as sunshine, fire or the like. NOTE: **There is only “on off” on the speaker, no middle position. Turn the speaker on, the Bluetooth and LED lights will both be on. **There is NO charging indicator hole for this unit. However, when the unit is being charged, there can be seen a red light from inside through the middle transparent ring. After the charging is full, the light will be off which can also be told from the middle transparent ring.