User's Manual

ManualsBrandsSure Wave ManualsAudio EquipmentBluetooth Speaker

InstructionManualforCQL1450‐C

ButtonSpecification:

1. PREVIOUS

2. NEXT

3. ALARM

4. POWER/SNOOZE/ /II

5. CLOCK

6. VOLUMEUP

7. VOLUMEDOWN

PowerforBluetoothSpeaker

 Usethepoweradaptor(included)andinsertthejackintothemicroholenamed“Charging”at

thebackoftheunit.

 TheLEDscreenwilldisplaythetime(brightwhitecolor)oncetheunitischarging.

PowerforTimeMemory

 AninternalrechargeableLithium batterysupplies power fortimememory. Thetime track will

stillgooniftheUSBcableispluggedout.

ToChargetheUnit

 Usethepoweradaptor(included),insertthejackinto”Charging”jacklocatedatthebackofthe

unitforchargingtheinternalbattery.Pleasechargeyourspeakerfullybeforefirstuse.

ToChargeOut:

 Tochargeyourdigitaldevice,useaUSBcable,insertthelargeendintotothebigholenamed

“USB5V”atthebackandinsertthesmallendoftheUSBcabletoyourdigitaldevice.

TimeSetting

 Long press “ClOCK” key , the hour will start to blink. Press the “+” & “‐” to change the hour

figures.

 Quickpress“ClOCK”keyimmediatelyafterfinishing settingthe hour.Theminuteswill start to

blink.Pressthe“+”&“‐”tochangetheminutefigures.

 Quickpressthe“ClOCK”keyonemoretimetofinishthetimesetting

 Thetimeformatis12‐hourand“PM”onthetopleftcornerwillshowitsafternoontime.

 When the Bluetooth function is shut down, quick press the “POWER/SNOOZE/ / II” key to

turnon/offthe LEDCLOCKscreen.

AlarmSetting

 Underthenormalmode,press“AL ARM”keytoenterthealarmsetting.Thealarmlogolocated

atthebottomleftcorneronthedisplaywillbecomebright.

Summary of content (4 pages)

PAGE 1
Instruction Manual for CQL1450‐C Button Specification: 1. PREVIOUS 2. NEXT 3. ALARM 4. POWER/SNOOZE/ / II 5. CLOCK 6. VOLUME UP 7. VOLUME DOWN Power for Bluetooth Speaker Use the power adaptor (included) and insert the jack into the micro hole named “Charging” at the back of the unit. The LED screen will display the time (bright white color) once the unit is charging. Power for Time Memory An internal rechargeable Lithium battery supplies power for time memory.
PAGE 2
Long press the “ALARM” key, the hour figure will start to blink quickly for a resetting. Press “+” & “‐” to change the hour figures. After the hour is set, quick press “ALARM” key to set the minutes. Press “+” & “‐” to change the minute figures. Quick press “ALARM” key one more time to set the alarm time. After 1 second, the LED will automatically go back to the normal CLOCK mode. To check the alarm time you have set at any time, quick press the “ALARM” key.
PAGE 3
c. If your Bluetooth is connected with your speaker, stop the music, when the alarm time is up, the alarm will play your music again with the same song and same volume. At the same time, the alarm logo at the bottom left corner will start blinking. d. Press the “ALARM” key to stop the blinking (To cancel the alarm you have set, you have to press the “ALARM” key one more time to ensure the alarm logo is not bright any more). Press the “POWER/SNOOZE/ / II” key to stop the alarming music.
PAGE 4
FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.