SDS
#89Brick&TileCleaner
Page4of6
Information on Basic Physical and Chemical Properties
Physical State Liquid Odor Moderate to sharp
Appearance Transparent pink liquid Odor Threshold Not determined
Color Colorless
Property Values
pH < 2
Vapor Pressure Not Determined
Boiling Point/ Range > 100°C (> 212°F)
Melting Point / Range Not Determined
Vapor Density Not Determined
Specific Gravity 1.1 – 1.4
Water Solubility Complete
Solubility in Other Solvents Not Determined
Flash Point Not Applicable
Flammable/Explosive Limits Not Applicable
Partition Coefficient Not Determined
Autoignition Temperature Not Determined
Decomposition Temperature Not Determined
Kinematic Viscosity Not Determined
Dynamic Viscosity Not Determined
Explosive Properties Not Determined
Oxidizing Properties Not Determined
VOC Content Not Applicable
Stability
Stable under normal conditions.
Hazardous Reactions
None under normal processing.
Hazardous Decomposition Products
Irritating and toxic gases or fumes may be released during a fire. Upon combustion, oxides of chlorine may be released.
Conditions to Avoid
Store away from incompatible materials.
Incompatible Materials
Alkalis. Do not mix with chlorates.
Reactivity
This product may react with strong alkalis.
Relevant Routes of Exposure Skin, Inhalation, Eyes
Potential Health Effects/Symptoms
Eye Contact This product is severely irritating to the eyes and may cause irreversible damage including burns and blindness.
Skin Contact Corrosive to the skin. Contact with the skin or mucous membranes may cause severe irritation and burns.
Inhalation Mists, vapors or liquid may cause severe irritation or burns. Inhalation of mists or vapors may produce
upper airway edema, wheezing, pulmonary edema, pneumonitis and respiratory failure.
Ingestion This product may be fatal if it is swallowed. This product may product corrosive damage to the gastrointestinal
tract if it is swallowed.
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
SECTION 10: STABILITY AND REACTIVITY
SECTION 11: TOXICOLOGICAL INFORMATION