Owner's Manual

Go Online!

All the instructions you’ll need on how to fit your Pet Door

in a wall can be found at:

surepetcare.com/support/microchip-pet-door-connect

Including a step by step guide, installation videos and

links to even more helpful information.

accessory

Fitting your Pet Door in a wall

Tools and supplies required

SureFlap Pet Door Tunnel Extenders

Electric drill & masonry bits

Protective clothing & eye-wear

Appropriate power tools for your wall

All-weather tape

Wall plugs & screws

Cross head screwdriver

Clear all-weather sealant

Before you begin

Please contact a qualified builder to discuss the best location to fit your Pet Door.

Remember some walls can be structural or there may be electrical wires, gas or

water pipes hidden within them which, if damaged, can cause serious problems.

We recommend that you do not attempt the work yourself unless you have

relevant experience. The job will be messy so protective clothing and eye-wear is a

must and when using power tools, please follow all safety instructions provided.

Also, have you programmed all of your pets in to the Pet Door? If not, we advise you

complete this process prior to fitting.

For wall installations, tunnel extenders can be stacked together to create a longer tunnel for the

Pet Door. The existing tunnel is 70mm (2 ”) long. Each tunnel extender adds 50mm (2”) to the

length of the tunnel. You will need to purchase enough tunnel extenders to span the thickness of

your wall + 10mm - the last extender needs to stick out by at least 10mm (”) for the external

frame to rest on.

Ruler & Spirit level

Blu tack

Sharp pencil

Vacuum cleaner

Calculating the number of tunnel extenders