User Guide

AMLogic - firmware burning tutorial
(If you think it’s necessary to update, you could update firmware in this way)
Here is the way to install new firmware for X96MAX+.
Prepare：
1 - USB to USB Cable(Male to Male)
2 - Latest firmware file for X96 MAX+(The download link is below)
https://bit.ly/2K0ttuu
3 - Computer(Before install system, add an app which is called USB_Burning_ Tool on this
PC)
4 - USB_Burning_ Tool(The download link is below )：
https://j.mp/38AfDJj
Steps:
1. Unzip the two downloaded files on the computer.
2. Install the app named USB_Burning_ Tool.
3. Open this app, then change the language to English as showing in the picture 1.
4. Get USB to USB Cable(Male to Male), use it to connect the computer's USB port to the
USB 3.0 port of X96 Max+.
5. Follow the notice(pls refer to picture 2, picture 3) on the picture. (no need to change
configuration, after importing file completely, just click start then when the progress bar
reaches 100%, unplug X96 MAX+)
Picture1
AMLogic - firmware burning tutorial
(If you think it’s necessary to update, you could update firmware in this way)