User Manual

8
PROPRIETARY
4. Click Scan, this will provide the user with a list of available devices in the drop menu.
5. When you have chosen the desired device by serial number in the drop menu above the Scan
button, press connect.
6. The WMR will connect to the device and a new tab will be created in Acheron with that device.
WMR Device Settings
In the WMR, the device settings relate to what Mote the WMR is going to talk with. By default, the
WMR is set to a Channel (radio frequency) of 0 in the 2.4GHz band. Also by default, the WMR is set to
connect to any Mote device. The auto-connect and serial number can be changed by a qualified
hardware installer, as these relate to the physical installation. Likewise, the channels will be changed by
the installer to reflect coexistence with other WMR and Mote devices in the same location.