Installation Guide
Table Of Contents
9
Installation
Installation
•
To learn how to install the Input Module in the enclosure, refer to Using the Input Module with the enclosure.
1
Fix a spacer on the position to mount Input Module using a fixing screw.
2
Fix the product on top of the fixed spacer firmly using a fixing screw.
Power Connection
DC Power
•
Make sure to use separate power for the access control device and Input Module.
•
Use the correct power specifications (12 VDC, 130 mA or 24 VDC, 82 mA).
•
It is recommended to connect and use an Uninterruptible Power Supply (UPS) to prevent power failure.
12 VDC or 24 VDC
GND